Operation
14
Solid State Digital
OPERATION
Cook
1. Turn the SELECTOR SWITCH (1) to the deĆ
sired position.
2. Enter the cook time and temperature.
3. Load product into the oven.
NOTE: The display reads LOAD when the
oven is near set temperature.
4. Push the START/STOP key (7). The timer beĆ
gins to count down.
5. When the cook timer reaches 00:00 the buzzĆ
er sounds and the display reads
DONE.
6. Press the START/STOP key (7) to silence the
buzzer.
7. Remove the product.
Cook with Hold
NOTE: The HOLD light is on when hold mode is
on and off when hold mode is off.
1. Turn the SELECTOR SWITCH (1) to the deĆ
sired position.
2. Enter the cook time and temperature.
3. Press the HOLD key (10). Enter the hold temĆ
perature.
4. Load product into the oven.
NOTE: The display reads LOAD when the
oven is near set temperature.
5. Push the START/STOP key (7). The timer beĆ
gins to count down.
6. When the cook timer reaches 00:00 the buzzĆ
er sounds and the display reads
DONE
. The
buzzer turns off after a few seconds. The disĆ
play reads HOLD until the oven reaches the
hold temperature. Then the timer begins to
count up.
7. Push the START/STOP key (7) to stop the timer.
8. Remove the product.
9. Push the HOLD key (10) to turn off hold mode.
Cook with Pulse
NOTE: The PULSE light is on when pulse mode is
on and off when pulse mode is off.
1. Turn the SELECTOR SWITCH (1) to the deĆ
sired position.
2. Enter the cook time and temperature.
3. Press the PULSE KEY (11). Enter the pulse time.
NOTE: Pulse time is a portion of the cook time
and does not increase the previously
entered cook time.
4. Load product into the oven.
NOTE: The display reads LOAD when the
oven is near the set temperature.
5. Push the START/STOP KEY (9). The timer beĆ
gins to count down the cook time. The oven
remains in pulse mode for the set pulse time.
When the set time expires, the unit automatiĆ
cally switches to cook mode and continues
counting down.
6. When the cook timer reaches 00:00 the buzzĆ
er sounds and the display reads
DONE
.
7. Push the START/STOP KEY (9) to turn the
buzzer off.
8. Remove the product.
