Blodgett BCX-14G, Troubleshooting Manual

Page: 17 / 117

Delime and Flush sequence for BCX14 &XUHQW Manual & Menuselect:
DELIME
Delime
Step Function Temp Time / Trigger
1 Fill the boiler
Emptying the boiler
Fill the boiler
Emptying the boiler
Pre-fill the boiler Water at High Level
90 sec (0 - 300 range)
Water at High Level
90 sec (0 - 300 range)
10 sec (0 - 300 range)
2 Pumping delime chemical into boiler
Delime solution detection 80 sec (0 - 300 range)
Water(Solution) at High Level
3 Wait so level sensor is dry
Filling
Overfill
30 sec -(0 - 300 range) No Water
Low Level
Water at High Level
5 sec (0 - 300 range)
4 Heating up 110°F(32 -250) N/A
5 Pause 3 min (0 - 300 range)
6 Heating up 140°F(32 -250) N/A
7 Pause 3 min (0 - 300 range)
8 Heating up to 185°F,
and let cool down to 180°F and back
to heating 140°F(32 -250) 30 min (0 - 300 range)
9 Fill the boiler
Emptying the boiler
Filling
Overfill Water at High Level
90 sec (0 - 300 range)
High Level
10 sec (0 - 300 range)
10 Rinse 1/3 – Empty
Rinse 1/3 - Fill
Overfill for 10 sec 90 sec (0 - 300 range)
Water at High Level
10 sec (0 - 300 range)
11 Rinse 2/3 – Empty
Rinse 2/3 – Fill 90 sec (0 - 300 range)
Water at High Level
12 Heating up 140°F(32 -250) Setpoint
13 Boiling for 2 min
Pause 120 sec (0 - 300 range)
30 sec (0 - 300 range)
14 Rinse 3/3 – Empty
Rinse 3/3 - Fill 90 sec (0 - 300 range)
Water at High Level
FLUSH
Flush
Step Function Temp Time / Trigger
1 Fill the boiler
Emptying the boiler
Filling Overfill Water at High Level
90 sec (0 - 300 range)
High Level 10 sec (0 - 300 range)
2 Rinse 1/3 – Empty
Rinse 1/3 - Fill
Overfill for 10 sec 90 sec (0 - 300 range)
Water at High Level
10 sec (0 - 300 range)
3 Rinse 2/3 – Empty
Rinse 2/3 – Fill 90 sec (0 - 300 range)
Water at High Level
4 Heating up 140°F(32 -250) Setpoint
5 Heat for 2 min
Pause 140°F(32 -250) 120 sec (0 - 300 range)
30 sec (0 - 300 range)
6 Rinse 3/3 – Empty
Rinse 3/3 - Fill 90 sec (0 - 300 range)
Water at High Level
17