Manual EN
Uninterruptible Power Supply
V 1.0
Charge and control units
BLOCK Transformatoren-Elektronik GmbH
Max-Planck-Strasse 36-46, 27283
.
Verden, Germany
31.08.20 / SCH
Subject to technical changes
7
3.3
Assembly
The charge and control unit can be mounted on the mounting rail without the use of tools.
First, rotate the front of the device is turned upward slightly and placed on the profile rail.
Ensure that the device is pushed down until the stop limit. When the device is on the profile
rail, press the underside against the mounting rail until it engages with the catch on the profile
rail (you will hear a ‘click’ sound). To check, gently shake the device to ensure that it is
properly locked into place.
A standard tool, like a flat-head screwdriver, is needed for disassembly. Press down on the
fastening to release the device by lifting the bottom side of the device from the profile rail.
Illustration 4: Mounting
Attention
:
Overhead mounting of the battery modules is not permitted.
