Manual EN
Uninterruptible Power Supply
V 1.0
Charge and control units
BLOCK Transformatoren-Elektronik GmbH
Max-Planck-Strasse 36-46, 27283
.
Verden, Germany
31.08.20 / SCH
Subject to technical changes
20
4.5
Battery module buffer times
The following image shows the maximum possible buffer times for the battery modules.
The buffer times symbolize typical average values that result after complete charging of bat-
tery modules in new condition.
Illustration 9: Battery module buffer times
The buffer time can be extended by adding up to three parallel-connected battery modules.
In this case, note that only the same battery modules with the same charge level can be
connected.
Illustration 10: Buffer time depending on the load current
Attention!
Connecting a 12 V battery module is not permitted in 24 V operation. This can lead to
destruction of the battery module.
