BLiNQ Networks Inc.
X-1200 System Installation Guide
Release 1.0
Confidential - Restricted Use and Duplication
Page
9
Issue 01 D1
Table 3 Required Items for Remote Backhaul Module Installation
No.
Description
Quantity
Note
1
X-1200 Remote Backhaul Module (RBM)
1
Per site
2
X-1200 Module Mount Kit with Self-Tapping Screw Bolts—Includes
module elevation bracket, module azimuth bracket, two pole
clamps, and pole/wall mount bracket
1*
Screws not provided
for wall/mast side
(1/4 in. holes)
3
Outdoor-rated Shielded Ethernet cable, CAT5e or better
< 100
meters
Not provided by
BLiNQ Networks
4
Ethernet cable connector and environmental housing with shielded
RJ45 connectors
1
Provided by BLiNQ
Networks
5
Power Cable:
Shielded 18 AWG 2 conductors 90C water resistant, black and
white conductor jackets, outdoor rated cable, 5-8 mm thick
Power Connector:
Weatherized DC connector to fit on power cable
1*
Option of 10m, 20m,
40m connectorized
cables
6
6-gauge grounding cable
1
Not provided by
BLiNQ Networks
7
Lightning/Surge Arrester
1*
Optional
8
Access to NOC Server, Providing FTP, SysLog, SNMP Browser, and
DNS Services
1
9
Basic Portable Personal Computer (PC); with NIC (Ethernet) port
required
1
Not provided by
BLiNQ Networks
10
Miscellaneous hardware and software as required:
for example, wrench, compass
as required
Not provided by
BLiNQ Networks
11
Power Supply Unit (PSU) Kit includes PSU, PSU bracket and
associated hardware
1 each*/
RBM
Optional
*Sold as a separate line item by BLiNQ Networks.
Table 4 Summary of Required Installation Tools (Not Provided by BLiNQ Networks)
No.
Description
1
Socket wrench with 3/8 in. driver head, with long and short ½ in. and 7/16 in. sockets
2
Slot head screwdrivers, small and medium size
3
Phillips #2 screwdriver
4
Torque wrench, 3/8 in. head with range for 4-60Nm or 3-45lbf-ft
5
Ratchet wrenches, ½ in. and 7/16 in.
6
Steel straps (for installation on pole diameters 3.5 in./9 cm or larger)
7
Four 5/16 in. or M8 wall mounting bolts, or equivalent, for wall installation (and bolt reinforcement
hardware if wall material requires it)
8
Black marker
9
Crimp tool
10
Cable ties
11
Torque screwdriver ¼ head with 5-40inlb range
12
Allen drivers metric 3mm and SAE 3/16” for GND lug and Beam Steering Antenna bracket
