3/38
PKP2500SI_CANopenUM_REV1.0
1.
How to connect the wires:
Each end of the CAN bus is terminated with 120
Ω
resistors in compliance with the standard to
minimize signal reflections on the bus.
You may need to place a 120Ω resistor between CAN
-L and
CAN-H.
Warning: to avoid breakage do not tighten the backshell nuts with a torque exceeding 0.8 Nm!
2.
Reference
Front view.
PKP2500SI
PIN
COLOUR
FUNCTION
1
Blue
CAN L
2
White
CAN H
3
Black
Negative battery
4
Red
Vbatt. (12-24V)