Fermenator G4 V2
© Blichmann Engineering, LLC 2021
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
6
PRESSURE RELIEF VALVE (PRV)
Before inserting the sanitized PRV (
Figure 7
) into the lid (
Figure 8
), verify that the PRV cavity is clean and free of debris and
foreign material. Sanitize the cavity and insert the PRV. Do not over tighten the cap. Pull on the ring to verify that operation is
smooth and the PRV fully extends. Install the spring type filter to the boss on the underside of the PRV port (
Figure 9
). This is
requried to prevent debris from passing through the PRV.
WARNING:
•
Release all pressure and remove the PRV from the lid before removing the lid clamp
•NEVER
tamper with the PRV
•
The PRV is an emergency pressure release
ONLY
•
Use
ONLY
genuine Blichmann replacement parts and seals
•NEVER
use this product without an airlock, blowoff tube, or spunding valve
Figure 7
Figure 8
Figure 9
