Step 1
Parts needed: DreamWay
interface, black hook & loop
filter strap, 2 white filters.
Step 2
Remove DreamWay vent swivel on
end of tube from the bottom of
the interface.
Step 3A
Apply the 2 pieces of white filter
material over the 2 cutout side
openings of the black hook
and loop filter strap. Be sure that the
“scratchy side” is facing up and on
the side you are applying the
white filter material on.
Step 3B
During the application of the completed
vent diffuser strap, the soft side of the
hook and loop strap needs to be on the
outside of the DreamWay.
Step 3C
This is to make sure the soft side is
what comes in contact with the face,
as shown in the image to the left, trapping
the hook and loop side with the white
filter material against the actual plastic
vent openings on the bottom of the
DreamWay.
Step4A
Apply the hook and loop filter strap,
with both white diffuser filters in place,
back onto the bottom of the vent
openings, where the tube was formerly
attached.
100607
