Blaze Outdoor Products Instructional Book
Page | 22
Version 1.4
of the burner surface, slightly close the air shutter. Re-tighten the phillips head screw and re-install the
burner to recheck the flame appearance. Repeat if necessary.
Turn burners to low flame setting and test for proper flame height. Flame should stand
between ¼” –
½” on LOW. (To adjust the LOW flame setting simply light the appliance on the LOW setting and adjust
the screw located under the knob on the front of the valve using a flat head screwdriver as seen in the
diagram below.)
If the burner does not light after several attempts, immediately close all gas valves and consult an authorized
service technician.
Before cooking with your appliance for the first time, burn off any foreign matter and rid the unit of any odors by
burning the unit on HIGH with the lid down for about 10 minutes. When lit, the flame should have a mostly blue
color to it. It may have a tint of yellow and adjustment to the air shutters can be made to obtain a blue flame and
proper gas glow. This appliance should be preheated before cooking with the main burner control settings on
HIGH for five minutes with the hood closed.
Cleaning Your Appliance
NOTE:
You should clean your appliance after each use to maintain the overall appearance over the life of your
appliance. After the first use, it is normal for your appliance to become discolored in certain areas from the heat
produced by the burners.
Exterior Cleaning
When cleaning your appliance, always scrub and polish in the direction of the stainless steel grain. Wipe down
the exterior of the appliance to remove any splatter or grease. Do not use harsh abrasives. Use a stainless
steel cleaner to clean the exterior surface for a polished look. To remove baked-on foods, use a fine to medium
grit non-metallic abrasive pad with a stainless steel cleaner to avoid specks of grease collecting in the grain
causing the appearance of rust. Before installing the cover, always allow the surface to dry. DO NOT cover a
damp appliance.
Drip Tray
Clean the drip try after each use. Failure to do so could result in a fire. Once the appliance has cooled
Low flame setting
screw
