180-CL2118.IPI.1 v1.00
August 5, 2020
Page 18
CL2118.IPI.1
5. Carefully slide the door glass assembly up
and out of the unit.(
Fig.4
)
GLASS DOOR REPLACEMENT
This glass in this appliance is a 5 mm high
temperature ceramic glass that will easily
withstand the heat that is produced. In the event
the glass breaks or cracks, contact your dealer
to arrange for your glass door replaced with a
factory replacement (see
“PARTS LIST”
). Do
not operate this appliance with the glass front
removed, cracked, or broken. Removal and
replacement of the glass from the door must be
done by a qualified service technician. The glass
door must be purchased from a Blaze King dealer.
No substitute materials are allowed.
BURNER REMOVAL
1.
Turn off the appliance and allow it to cool down
completely.
2. Remove the face trim, safety screen, and glass
door. (see
“GLASS DOOR REMOVAL”
on
previoius page)
3.
Remove the glass floor plate and set it aside.
(
Fig.5
)
4.
Remove the floor plate assembly and set it
aside.(
Fig.5
)
5. Remove the screw from the left hand side of
the burner assembly.(
Fig.6
)
6. Move the burner to the right, up, and out.
To re-install the burner follow steps 1 to 7 in
reverse. Ensure the burner is centered in the
curved burner slot of the floor plate.
Fig.4
Fig.5
GLASS FLOOR PLATE
FLOOR PLATE
Fig.6
SCREW
BURNER
MAINTENANCE and SERVICE
