180-CL2118.IPI.1 v1.00
August 5, 2020
Page 15
CL2118.IPI.1
OPERATING INSTRUCTIONS
Continuous Pilot / Intermittent Pilot (CPI/IPI) Selection
With the system in “OFF” position press the Mode Key (
Fig. 1
) to index to the CPI mode icon (
Fig. 17 & 18
).
When enabled it will act as a standing pilot unit with an automatic shutoff timer that will turn the pilot off after 7
days.
Pressing the Up Arrow Key will activate the Continuous Pilot Ignition mode (CPI). Pressing the Down Arrow
Key will return to IPI. A single “beep” will confirm the reception of the command.
Fig. 17
Fig. 18
Key Lock
This function will lock the keys to avoid unsupervised operation.
To activate this function, press the MODE and UP Keys at the same time
(
Fig. 19
).
To de-activate this function, press the MODE and UP Keys at the same time.
Low Battery Power Detection
The life span of the remote control batteries depends on various factors:
quality of the batteries used, the number of ignitions of the appliance, the
number of changes to the room thermostat set point, etc.
When the Transmitter batteries are low, a Battery Icon will appear on the LCD
display of the Transmitter (
Fig. 20
) before all battery power is lost. When the
batteries are replaced this Icon will disappear.
Fig. 19
Fig. 20