
81
The distance for the calibration
travel is displayed.
Change the distance of the cali-
bration travel, if required, by
turning the menu button
<
.
Next, press the
OK
button
=
.
Note:
The distance must measure be-
tween 100 and 500 metres. The
adjusted distance must exactly
match the measured distance!
Press the
OK
button
=
to start
the manual calibration.
Drive the specifi c distance which
you set on an exactly measured
route. Do not drive faster than
30 km/h.
Press the
OK
button
=
to end
the manual calibration.
After a successful calibration
travel, the display shows "
The
system is now calibrated
". The
navigation system is now opera-
tional.
If the display shows "
Calibration
unsuccessful
", you must repeat
the calibration.
➜
➜
➜
➜
➜
Manual calib.
Distance
200
Metres
Cancelling the calibration
If you want to cancel the calibra-
tion:
Press the
ESC
button
A
.
The calibration continues in the
background.
Cleaning the device
Clean the contacts of the con-
trol panel regularly using a soft
cloth moistened with cleaning
alcohol.
Uninstalling the device
Disconnect the negative pole of
the battery. Observe the safety
notes of the vehicle manufac-
turer.
Remove the control panel.
Insert the brackets
2
on the left
and the right side in the openings
in the control panel and push
them in until the lateral springs
disengage with an audible click
sound.
Pull out the device evenly using
both brackets.
Remove the brackets and reat-
tach the control panel.
Press on the lateral tabs of the
individual connectors and dis-
connect all connectors.
➜
➜
➜
➜
➜
➜
➜
➜
2
Installation instructions
ROMENAV55Eman_star_ois_eng.indd 81
ROMENAV55Eman_star_ois_eng.indd 81
06.12.2005 16:04:58 Uhr
06.12.2005 16:04:58 Uhr