manualshive.com logo in svg

Blaupunkt TravelPilot E EXACT, Operating And Installation Manual, Page: 18 / 104

Share
Download
Blaupunkt TravelPilot E EXACT Operating And Installation Manual Download Page 18

INTRODUCTION

NAVIGATION

18

RADIO

CD / MP3

CD CHANGER

SETUP

APPENDIX

Display

The TravelPilot E’s display contains all the navigation information (e.g. visual
driving recommendations), menus and lists, as well as the radio, CD and CD-
changer (optional) audio sources.

The display’s brightness and readability can be optimised to suit the viewing
angle in your vehicle. For further information, read the section entitled “Setting
the day/night display brightness and contrast” in the “Setup – basic settings”
chapter.

Note: Please treat the display with care. Contact with sharp objects
causes scratches and damages the covering pane. Only clean it with
a lint-free cloth and, if necessary, with some cleaning alcohol. Do
not use any solvents such as turpentine or petrol when cleaning,
since these will affect and damage the pane.

 1 BA TP E gb

12.04.2005, 14:13 Uhr

18

Summary of Contents for TravelPilot E EXACT









































































































Reviews:

No comments