
Quick reference
Here is a recap of feature highlights:
Key Features:
Security System with 2
Cards
Each
also holds separate Preset,
Audio and DSC Settings
Flashing LED “Tongue” Warning System
Window Decals
Illumination
Brightness and Viewing Angle Adjustment
17 Direct Software Control Menu Options
Wireless Remote Control Ready
IV-US Tuner Features:
RDS (Radio Data System) Reception
Station Call Letter Display
PTY Program Type Seek
AF Alternative Frequency Search
Emergency Alert System Capability
Multipath Management
18 FM/6 AM Presets, including 6 FM/6 AM
Presets
Station Scan Preset Scan
3 lo and 3 dx Tuning Sensitivities
ASU Electrical Impulse Noise Suppression
Switching on with the ignition being
switched-off:
To keep on operating the set when the
ignition is switched off
is in-
serted), proceed as follows:
Press ON after the double beep tone.
The unit will be turned on.
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).
For instantly muting the volume.
By pressing the
button the volume
will be muted immediately. “MUTE” will
appear in the display.
The function is cancelled by pressing
button or VOL+.
When pressing VOL-, the normal vol-
ume will be by one grade lower than
the mute volume.
Audio Features:
4 x 35 Watts Peak Internal Power
Dual-Level Fader
V Preamp Out w/75 Ohm
Resistance
Switchable Auxiliary Input
CD Player DMS CD Changer
Control Feature Highlights:
Controls Blaupunkt CDC-A05 or
A071 Changer
Disc Naming
Track program memory
Other Features:
Quick-Release Wire Harness
DIN Chassis, Bracket Hardware
Dimensions 179 x 50 x 150 mm
Designed, Engineered and Manufactured
by Blaupunkt in Germany
To program the mute volume level,
proceed as follows:
l
Adjust the desired volume.
l
Press for two seconds until you
hear a beep.
Now this volume level is stored as your
mute volume.
Extra function
Memory button in the DSC menu.
FMT
Press repeatedly to switch between
the FM memory banks I, II and T
(Travelstore).
When pressing this button, the system
will automatically switch to FM.
Extra function FMT
To
store
the six most powerful stations
automatically
with Travelstore:
Press FMT until you hear a beep or
“T-STORE” appears in the display.
AM switch
Extra function AMT
To
store
the six most powerful stations
automatically
with Travelstore:
Press
AMT
until you hear a beep or
“T-STORE” appears in the display.
Switching on/off with the ON but-
ton:
Press ON.
When switching the set on with the ON
button, the
has to be insert-
ed. The unit will play with the
volume.
Switching on/off with the
The set has to be turned on via the ON
button.
Note:
Read the information in chapter
Card theft protection system”.
Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off via
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the
before leaving your vehicle.
5
Rocker switch
Radio
Station search (seek tuning)
Down
Up/Down in short intervals when
AF
is off (manual tuning)
When AF is
on,
press
to
seek previously-turned RDS sta-
tions. Once RDS stations have
been turned in by radio, they are
added to this RDS seek table.
e.g. WNEW, WNYC-FM, THE
WAVE.
6