FCC WARNING
The
equipment has been tested and found to comply with the limits for a Class B device, pursuant to Pad 15 of the FCC Rules.
limits are designed provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used
accordance with instructions may cause harmful interference with radio communications. However, there is no guarantee that radio interference
in
installation. If this
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
to try to contact the
or an
technician for help
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
CAUTION
l
The use of optical instruments with this product will increase eye hazard.
l
Because the invisible laser beam in this compact disc player is harmful to the eyes. do not attempt to disassemble this cabinet. Refer servicing to qualified personnel only.
SAFETY
This Compact Disc Player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the US Department
of Health and Human Services.
OWNER’S RECORD
The model and warranty numbers are located on the top of the unit Record the serial number in the space provided below Refer to these numbers whenever you Call upon your
Blaupunkt dealer regarding this product.
Warranty Number
FEATURES
on your purchase of the Blaupunkt CD Receiver. Its Optimum Reception Control (ORC Ill) quartz FM/AM tuner Anti-Vibration Shock CD Mechanism provide the
ultimate in sound reproduction. Its high-power amplifier and Z-channel RCA preamp output provide tremendous system configuration flexibility.
l
Tuner Features:
l
CD Features
l
Audio Features:
. General Features:
ORC Tuner
Track Up/Down
Track Scan
35 Watts (Peak) x 4 Channel
Detachable Faceplate for Security
12
AM Station Presets,
Cue/Review
Pause/Play
Integrated Amplifier
Switchable Clock/Function LCD Display
Including Travelstore for all Presets
Track Repeat
Track Mix
P-Channel RCA Preamp Output:
Ignition-Off Clock Recall
Automatic and Manual Tuning
Track Number Indication
Dual-Level Fader
Green Illumination RPD 435
Station Scan Preset Scan
Elapsed Track Time Indication
Volume/Balance/Fader Controls
Amber Illumination RPD 435X
RPD 435X US/Euro Tuning
DISC IN Indicator
Adjustable Turn-On Volume-Level
Detachable Wire Harness
1
Times Oversampling Digital Filter
Loudness Control
Your unit’s detachable front faceplate
Silicone-Oil Dampened Anti-Vibration
Separate Bass and Treble Controls
Chassis
makes the unit useless to would-be
and Shock CD Mechanism
Snap-In DIN Sleeve Mounting Hardware
thieves.
PRECAUTIONS
l
The use of optical instruments with this product will increase eye hazard.
. Because the laser beam in this compact disc player is harmful to the eyes, do not attempt to disassemble this cabinet. Refer servicing
. If your vehicle was parked in direct sunlight resulting in a considerable rise in temperature inside the vehicle,
the Unit
Off before Operating
Unit.
l
If no power connection is supplied to the unit, check the
first. If everything is in order, check the fuse.
l
If no sound comes from the speakers of a two-speaker system, set the fader control to the center position.
. You are cautioned that any changes or modifications not expressly approved in this manual could void your Warranty.
. If you have any questions or problems concerning your unit that are not covered in this manual, please contact your Blaupunkt dealer.
DETACHABLE FACE
Detaching Attaching the Face:
The face of this
can be detached and taken with you to prevent it from being stolen.
Detaching the Face:
Press the REL (Release) Button and detach the face by gently pulling it off as illustrated. (See Fig.1 below.)
Note: Do not pull it straight out from the chassis. Be sure not to drop the face when detaching it from the
chassis.
Attaching the Face:
Apply the
hand side of the face to the chassis by sliding it into the right side of the chassis. Gently push the left side of the face against the front Of the chassis Until it