Blaupunkt Rio de Janeiro 120, Owner'S Manual, Page: 12 / 18

12
switching, which EON TA information was
received from current station and the radio
switched to that EON linked station, but no
Information could not be received because
the
EON linked station is located too far
from that area. So the radio is switched
back to current station again. In above
operation, a
customer listens to a wrong program or
mute sound for a while. The RDS data used
are the PI, PS, AF, TP, TA, EON and PTY
data.
PS: Program Service Name
Broadcast station name data expressed
in alphanumerically characters
OPERATION
AF: Alternative Frequencies
Frequency list of broadcasting stations
transmitting the same program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or not.
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF, TP,
TA, etc, relating to networks other than
the network used for current reception.
USB PLAY OPERATION
In the front panel of the unit, there is an
USB interface (8). You can connect an USB
driver through this interface (8).
When you connect an USB driver through
the interface, the unit will search the MP3/
WMA files in the USB driver and start to
play. If in other mode, you can also press
SRC button to select USB mode.
The operation please refer to the following
instruction.

SELECTING FILE
Press button (20) or button
(22) to move to the previous file or the
followingfile. File number shows on the
display.
Hold
button (20) or button (22)
to fast reverse or fast forward.

PAUSING PLAYING
Press button (15) to pause playing.
Press it again to resume play.

SCAN PLAY ALL FILES
Press SCN button (14) to play first
several seconds of each file. Press
again to stop
intro play and listen to file.

REPEATING THE SAME TRACK/FILE
There are 3 ways to repeat file as
below:
Repeat folder---Repeat one---Repeat
all.
The default mode is repeat all. Press
RPT button (13) to select one way as
above.

PLAYING ALL FILES IN RANDOM
Press RDM button (12) to play all files in
random order. Press it again to cancel
the random function.
SELECT DIRECTORY UP/DOWN
Press DIR
-
button (11) or DIR
+
button
(10) to select previous directory or next
directory. If the MP3/WMA disc does not
contain any directory, there is no
function of pressing
DIR
-
button (11) or
DIR
+
button (10).

SELECTING FILES BY BUTTON
(17)
is assigned as selection
button in MP3/WMA operation.
Press button. It is activated the
“Search file number” mode. Rotating
knob (19) to select the file number then
press MENU button to confirm. The unit
searches the selected file to play. You