Blaupunkt Rio de Janeiro 120, Owner'S Manual, Page: 11 / 18

11
to select the desired band.
The reception band will change in
following order:
→FM1→ FM2→ FM3 → MW1(AM1)→ MW2(AM2)

SELECTING STATION
Press button (20) or button
(22) shortly to activate automatic seek
OPERATION
function. It will search up/down a station
automatically. Press for 2 seconds until
“
MANUAL ” appears on the display, the
manual tuning mode is selected. In this
mode you can turn up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to
seek tuning mode and “
AUTO ” appears
on the display.

AUTOMATIC STORING & PROGRAM
SCANNING
- Automatic storing
- Press TS button (16) for 2 seconds the
radio searches from the 87.5MHz
frequency and checks the signal
strength until one cycle search is
finished. And then 6 strong stations are
stored into the corresponding preset
number button of the FM3 band. In the
first cycle it will in LOCAL mode to
receive the stronger station. If it is less
than 6 pcs station it will searching
stations in 2
nd
cycle in DX mode.
- Program scanning
Press TS button (16) shortly to scan
preset station. The radio is holding at
that preset number for 5 seconds with
release mute.

STATION STORING
To received a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button
(1~6) to directly listen the station that
saved in the corresponding preset button.
RDS (RADIO DATA SYSTEM)
OPERATION
Setting RDS mode
In AF item of RDS menu rotating the audio
knob to switch on/off AF function.
Whenever AF is on, symbol “AF” appears
on the display.
Program name is displayed on receiving a
RDS station.
“ AF ” starts blinking if the broadcasting
signal getting worse.
“ALARM” will be displayed when an
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control is
set at minimum.
Listening to Traffic Announcement
In TA item of the RDS menu. Rotating the
audio knob to switch on or off the TA
function. When
TA mode is on and a traffic
announcement is transmitted:
When the unit was in MP3 or AUX IN mode,
it will switch temporarily to radio mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program. If the
volume level was under the threshold point
it will be raised to the threshold point.
When TA mode is on, TA of individual
segment is turned on. When a TP station is
received, TP of individual segment is
turned on.
The current traffic announcement is
cancelled by turn the TA function to STOP
(in TA item of
RDS menu, when the TA
station is not received it only has on/off. But
when received a TA station the TA item will
have on/stop/off for your selection). But the
TA mode will not be off. unwanted EON TA