10
region. You have to setting the clock format
again.
AREA:
In the AREA item of the menu. There are
EUR/USA/LAT for your selecting.
TA volume:
This function allows you to
OPERATION
define the minimum volume for the traffic
announcements. The adjustable range is
10~43. The defaulted value is 21. Rotate
the volume knob to adjust the volume of
the traffic.
REG on/off
When AF function is on. In SEL menu
you can switch on or off region mode in
REG item. Some broadcasting stations
change their program from normal
broadcasting to regional broadcasting for
a certain time period. When region is on,
the current listening program remains
unchanged.
EON on/off
In SEL menu You can set the EON on/off.
Normally set the EON to on.
DISPLAY INFORMATION
Press
DISP
button (1) to show the time for
5 seconds. Then it returns to show the
information.
SET THE TIME
(1) Manual setting:
Press and hold
DISP
button for 2 seconds.
The hour of the time will be flashing. Press
/
button (or rotating the audio knob)
to set the hour. Press
DISP
button shortly
to change to minute. Also use
/
button (or rotating the audio knob) to set
the correct minute. After that press
DISP
button to confirm.
(2) Synchronize the time from the RDS
station:
To receive a RDS station which has good
signal(The AF symbol of the LCD does not
flashing). Several minutes later the time will
be synchronized to the correct time by the
station
’
s signal. (Note: None RDS station
does not have this function.)
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the
AUX IN
jack (9).
Pressing
SRC
button to switch to
AUX IN
mode when inserted an audio source to the
unit.
RESET FUNCTION
RESET
button (23) must be activated with
either a ballpoint pen or thin metal object.
The
RESET
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET
button (23), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel. When pressed
the
RESET
button all the memory will be
lost.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press
SRC
button (2) to select radio
mode, the radio mode appears in the
display.
SELECTING THE RADIO BAND
At radio mode, press
BAND
button (5)