Blaupunkt Phoenix CM 127 Operating Instructions Manual Download Page 11

Specifications

Audio power specifications

Power output and total harmonic distortion: 19 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from 35-15 000 Hz.

Other specifications

Tuner
FM
Tuning range:

87.5 - 108 MHz

FM mono sensitivity:

1.0 

µ

V

Signal-to-noise ratio:

65 dB (stereo), 70 dB (mono)

Frequency response:

35-15 000 Hz

AM
Tuning range:

531 - 1602 kHz

Signal-to-noise ratio:

50 dB

Frequency response:

35-5 000 Hz

Cassette
Signal-to-noise ratio:

55 dB

Dolby B NR:

65 dB

Tape wow and flutter:

0.3 %

Tape frequency response:

35-15 000 Hz

Audio
Speaker impedance:

4-8 ohms

Maximum amp power:

4 x 30 watts (at 4 ohms)

RMS power:

4 x 19 watts (at 4 ohms)
acc. to DIN 45 324 at 14.4 volts

General
Dimensions (w/o projecting parts/controls):

179 x 50 x 150 mm

Mass:

Approx. 1.4 kg

Power requirement (neg. grnd.):

12 V DC car battery (11-16 V DC allowable)

Operating temperature:

-20

°

C to 60

°

C

Supplied accessories:

• Unit
• Faceplate (release panel)
• Wire harness
• DIN sleeve
• Mounting hardware
• Owner’s manual
• Car radio passport
• Labels

Design and specifications subject to change without notice.

Blaupunkt-Werke GmbH

Bosch Gruppe

07/97 Sl

K7/VKD 8 622 401 230

 Phoenix CM 127 (EU) gb®

02.05.2002, 11:41 Uhr

44

Summary of Contents for Phoenix CM 127













Reviews: