50
Switching REGIONAL on/off
Press the
MENU
button
9
.
"USER MENU" appears on the display.
Press the or button
:
repeat-
edly until "TUNER MENU" appears on
the display.
Press the button
:
to open the
menu.
Press the or button
:
repeatedly
until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
To switch REGIONAL on/off,
press the or button
:
.
When you have fi nished making your chang-
es,
press the
MENU
button twice
9
.
Switching the RDS function on/off
To switch the RDS functions AF and
REGIONAL on or off,
press and hold down the
TRA•RDS
but-
ton
7
for longer than two seconds.
"RDS ON" or "RDS OFF" is activated and
briefl y appears on the display.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Six stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
briefl y press the
BND•TS
button
6
.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the or button
:
.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the convenient RDS function is
deactivated.
To change the set frequency in small incre-
ments,
briefl y press the or button
:
.
To change the set frequency quickly,
press and hold down the or button
:
for a longer period of time.
쏅
쏅
쏅
쏅
Radio mode
02OrlandoMP46_gb.indd 50
02OrlandoMP46_gb.indd 50
01.03.2006 15:45:52 Uhr
01.03.2006 15:45:52 Uhr