Blaupunkt Milano MP34, Operating Instructions Manual, Page: 8 / 27

31
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Switching on/off
There are various ways of switching the
device on/off:
Switching the device on/off using
the vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and you did not
switch it off by pressing button
2
, the
device will switch on/off simultaneously
with the ignition.
Switching the device on/off using
the detachable control panel
➮
Detach the control panel.
The device switches off.
Note:
●
The device will switch off after a
preset time period. For further de-
tails, read the section entitled “Off
timer”.
➮
Attach the control panel again.
The device switches on. The last set-
ting (radio, CD, CD changer or AUX) will
be reactivated.
Switching on/off using button
2
➮
To switch on the device, press but-
ton
2
.
➮
To switch off the device, press and
hold down button
2
for longer
than two seconds.
The device switches off.
Note:
●
To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Note:
●
When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on with the last
settings activated (i.e. radio, CD, CD
changer or AUX) when the panel is re-
placed.
Off timer
After you detach the control panel, the
device will switch off after a preset time
period. You can set this time to between
0 and 30 seconds.
➮
Press the MENU button
8
.
➮
Press the or button
7
re-
peatedly until “OFF TIMER” ap-
pears in the display.
➮
Adjust the time using the but-
tons
7
.
When you have finished making your
changes,
➮
press the MENU button
8
twice.
Note:
●
If you set the off-timer to 0 sec-
onds, the device will switch off im-
mediately as soon as you open the
control panel.
CONTROL PANEL SWITCHING ON/OFF