21
up to 12 dB boost in bass (centered at 60 Hz) and up to a 4 dB boost in treble (centered at 8 KHz).
To set the loudness level for each source, use << and >>.
Radio Station Naming (“STN NAME”)
Available only while radio is active source. One name per frequency, 8 characters per name.
(Names can be assigned to any frequency, preset or not.) If you try to enter more than 30 names,
“**FULL**” appears. You can then enter new names after erasing some of existing names.
To store station names:
1.
Press DIS for more than 2 seconds to enter Menu mode.
2.
Scroll to Radio Station Naming feature by pressing /\ / V .
3.
Enter Station Name Access mode by pressing << or >> button.
4.
Tune to desired station using BND, presets or /\ / V buttons. If previously named, name
appears.
5.
Press << or >> buttons to enter Station Name Edit mode. Eight “ ” appear with first one
blinking.
6.
Press /\ / V to select character. Select “ “ for a blank space.
7.
Press << or >> buttons to select next character position.
8.
Press Mute to store name. Display blinks STORING twice before return to Station Access
mode.
9.
To name another station, repeat steps 4-8.
10. To return to Menu, press Mute again.
(There is no time-out from Station Name Access & Edit modes.)
Display Priority & Radio Station Names
(See Display Options on page 13)
Changing a Radio Station Name
Repeat steps 1 to 10 in Radio Station Naming, changing only those characters that you wish to
change.
Erasing ONE Radio Station Name
Access Station Access mode (See Radio Station Naming, above.) Choose station with name to be
deleted. When name appears, press Mute for 2 seconds. Beep sounds. Release now to delete this
name. “NAME” and “DELETED” blink alternately.
Erasing ALL Radio Station Names
Access Station Access mode under Menu. When a name appears, press Mute (3) for 8 seconds.
“ALLNAMES” appears for 2 seconds, then “DELETED” until deletion completed.
Disc Naming (DISCNAME)
Assigning a name to a disc makes it much easier to locate the desired disc in the changer. You can
enter and store names of up to 99 discs (one name per disc, maximum of 7 characters per name).
If you try to enter more than 99 names, ***FULL*** indication will appear. You can then enter new
names after erasing some of existing names.
To name a disc:
1.
Press DIS for more than 2 seconds to enter the Menu mode.
2.
Scroll to Disc Naming function by pressing /\ / V
3.
Enter Disc Access mode by pressing << or >> button.
4.
Select desired disc using the /\ / V buttons. If previously named, name appears.
5.
Press << or >> to enter Disc Name Edit Mode.
6.
Press /\ / V to select characters. Select “_” for a blank space.
7.
Press << or >> buttons to select next character position.
8.
Press Mute to store name. Display blinks “STORING” twice. Unit returns to Disc
Access mode.
9.
To name another disc, repeat steps 4-8.
10. Press Mute to return to Menu.
(There is no time-out from Disc Name Access & Edit modes.)
Summary of Contents for Los Angeles CDM147
Page 1: ......