Blaupunkt London RDM 104 Operating Instructions Manual Download Page 24

47

London RDM 104

DE

UT

S

C

H

EN

GLI

S

H

IT

A

L

IANO

POR

T

UG

UE

S

NE

DE

RL

AND

ESP

A

OL

SVEN

SK

A

F

RANÇAI

S

Selecting tracks

In order to select a track

press the rocker switch  /  briefly.

Forward and rewind
In order to fast forward or fast rewind

hold the rocker switch   or   pressed
down during playback.

The playing time will appear in the display.

Selecting a CD
In order to select a certain CD in the magazi-
ne

press either the rocker switch << or
>>.

If you select a CD number from the magazine
where you have not inserted a CD, then NO
CD
 will appear in the display. The changer
will select the next CD available.

Scanning tracks (CDC SCAN)
In order to scan all of the tracks

press the PS/MIX button for longer than
2 seconds.

If you would like to listen to the track currently
being played,

then just press PS/MIX once again.

After all of the CDs in the magazine have
been scanned, then playback will begin as
usual.

MIX playback

You can play either all of the tracks of one CD
(MIX CD) or all of the tracks of all of the CDs
(MIX MAG - magazine) in random order.

MIX CD

Use the rocker switch <</>> to select
the CD.

Press the PS/MIX button briefly.

MIX MAG

Press the PS/MIX button twice.

In order to switch off the MIX function

Press the PS/MIX button repeatedly
until MIX OFF appears in the display.

TPM (Track Program Memory)

Use TPM to store up to 99 tracks of your
choice from this magazine and others.

Use the rocker switch <</>> to select
the CD.

Press the rocker switch  /  repea-
tedly until the number of the track ap-
pears in the display.

In order to store the track

press TPM repeatedly until you hear a
“beep” or the audio mute switches off
again.

Proceed as described above in order to store
other tracks.

Playback with TPM
In order to playback tracks you have stored
with TPM

press the TPM button.

Use the rocker switch <</>>, to select
CD1, for example.

The tracks on all of the CDs stored with TPM
will be played in ascending order.

Deleting TPM
Delete TPM for a single track or an entire CD
in the magazine in the same way as for the
CD player in the radio.
TPM must be switched on.

Deleting a single track

Select the track with the rocker switch

/ .

Press the lo/CLR button repeatedly
until CLR TR 2, for example, appears in
the display.

Deleting TPM for an entire CD

Select the CD number with the help of
the rocker switch <</>>.

Press the lo/CLR button repeatedly
until CLR CD 3, for example, appears
in the display.

Summary of Contents for London RDM 104



























Reviews: