London RDM 104
44
Programming with DSC
Using DSC (Direct Software Control), you
can adjust certain settings and functions for
this car radio to your own liking and then store
them.
The basic settings for this audio equipment
have been made at the factory. Please refer
to the following overview for the basic factory
settings so that you can always reset to these
if desired.
If you wish to alter any of the programming,
•
then press the DSC button.
Use the rocker switch to make your selection
from among the following functions and to
make the adjustments desired. The current
setting for that function will first appear in the
display.
select function
select function
set
value
set
value
In order to confirm or finish a setting,
•
then press the -dB or the DSC button.
The following DSC settings are available:
TIME:
Use <<to set the hours,
>> to set the minutes.
To set the time press the
rocker switch / .
CD-NAME:
Use this function to name
your CDs.
ANGLE:
Use this setting to alter the
viewing angle to your liking
from -1 to 0 to +1.
BEEP:
This sound will confirm
functions which are com-
pleted by pressing a button
for longer than 2 seconds.
You can adjust the volume
from 0 to 9 with the help of
the rocker switch << / >>
(0 = off).
BRIGHT:
You can adjust the bright-
ness of the display from
values between 1 and 16.
You can also select diffe-
rent values for day and
night.
Selecting the night bright-
ness:
Switch the dashboard illu-
mination on and program
the brightness value. The
audio equipment must be
connected with the vehicle
lighting for this to function
correctly.
COLOUR:
With this setting, you can
alter the colour of the dis-
play from G = green to R =
red.
CD DISP:
Use the rocker switch << /
>> to select whether you
would like the CD NAME,
the playing TIME or the
NUMBER to appear in the
display.
LED ON/OFF: You can choose here bet-
ween LED ON or LED
OFF. With LED ON, the
KeyCard tongue will flash
as additional theft protec-
tion when the unit has been
switched off and the Key-
Card removed.