Blaupunkt KOPENHAGEN RCR 45 Operating Instructions Manual Download Page 6

23

Kopenhagen RCR 45

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

;

PROG button/Fast winding

To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows TR1-PLAY or TR2-PLAY.

Fast winding
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.

<

SC
Radio operation
Scan (sampling all stations to be recei-
ved): Press SC briefly.

=

PS
P
reset Scan (sampling all stations
stored on the preset buttons): Press PS
briefly.

>

1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each me-
mory bank (I, II, T).
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the desired
memory bank by pressing the FM or TS
button as many times as required. Then
press the corresponding preset button
briefly.

?

TIM/TA
TIM
 (TraffIMemo)
To play all the stored traffic announce-
ments:
Press TIM briefly.
To activate/deactivate the priority for
traffic announcements:
Press TIM for approximately 2 seconds.

TA (Traffic Announcement)
If TA lights up in the display, the system
will only play traffic stations.

@

TS - Travelstore
To store the six most powerful stations
automatically with Travelstore:
Store: Press TS until seek tuning starts
in the display.
Recall: Press TS, “T” is indicated in the
display. Then briefly press one of the
presets 1, 2, 3, 4, 56.

A

FM
To select one of the FM memory banks
I and II.
To change the memory bank:
Press button until the desired level is
indicated in the display.

Summary of Contents for KOPENHAGEN RCR 45




















Reviews: