Blaupunkt KEY LARGO DM2000 Manual Download Page 12

ENGLISH

E-11

Connections

Warning

• To prevent short circuit, remove the key from the ignition

and disconnect the battery’s (-) terminal.

• This unit is designed for negative ground 12 V DC operation

only. You can not use it for 24 V or other types of car batter-
ies.

Connection procedure

Caution

• DO NOT connect any speaker wires to the metal body or

chassis of the vehicle.

• DO NOT connect the speaker common (-) wires to each

other.

• Connect each speaker wire directly to each speaker termi-

nal.

• All speaker common (-) wires must remain floating.

ie. No common connections or connection to vehicle grd.

• Connect each pair of speaker leads only to a single speaker

(or speaker system) that has an impedance of least 4 ohms,
as well as 50-watt power-handling capability.

• Do not connect speaker leads to any inputs on external

amplifiers. This will cause damage to the internal amplifier
of this unit.

1

Make sure the car’s ignition key has been removed.

2

Disconnect the negative(-) terminal of the car’s bat-
tery.

3

Connect the wiring harness wires in the following
order : Ground wire (Black), +12V Constant Power
Supply (Yellow), +12V Accessory/Switched (Red) and
Power Antenna/Amplifier Turn On (Blue), and tape
each so they do not come in contact with each other.

4

Connect the speaker wires of the wiring harness.

5

Connect the car’s antenna terminal to the antenna
socket of the unit.

6

Connect the detachable wire harness to the unit.

7

Reconnect the negative(-) terminal of the car’s bat-
tery.

8

Start the car’s engine.

9

Make sure the unit operates properly.

Connection procedure

(White)

(White/Black)

(Gray)

(Gray/Black)

(Green)

(Green/Black)

(Violet

(Violet/Black)

Left 
Speaker

Right 
Speaker

Do Not 
Connect

Front Left
Speaker

Front Right
Speaker

Rear Left 
Speaker

Rear Right 
Speaker

(White)

(White/Black)

(Gray)

(Gray/Black)

(Green)

(Green/Black)

(Violet

(Violet/Black)

Do Not 
Connect

2-speaker System

4-speaker System

+12V  Constant Power Supply (Yellow)

+12V  Accessory/Switched (Red)

Ground Wire (Black)

Power Antenna/Amplifier Turn On (Blue)

Tel mute (Brown)

ANTENNA PLUG

ANTENNA SOCKET

In the case of a 2-speaker system, 
tape the ends of unconnected 
terminals to prevent short circuit

Preamp Out/Line Out Connections

• Since this unit has Line Level Outputs, you can use an amplifier to upgrade your vehicle stereo system.

External Amplifier

Rear Speaker

White (Left)

Red (Right)

RCA Line-out Jacks

RCA Line-out Jacks (For Rear Speakers)

• Connect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA line output jacks of

the unit to the line input terminals of the external amplifier.

For connection to optional
CD changer or AUX-IN ca-
ble #7 607 897 093

Summary of Contents for KEY LARGO DM2000















Reviews: