Blaupunkt FRANKFURT 100 Operating And Installation Instructions Download Page 2

CAUTIONS

Use only a dry or slightly moistened cloth for
cleaning the car sound system.
If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.

 
 

Do not dispose of your old

 

unit in the household trash!

1 Car radio
1 Operating & installation instructions
1 Remote control (incl. battery)
1 Connecting cable chamber A
1 Connecting cable chamber B
1 Installation kits
2 Removal key

CLEANING NOTES

Solvents, cleaning and scouring agents as well
as dashboard spray & plastics care product may
contain ingredients that will damage the
surface of the car sound system.

• 

DISPOSAL NOTES

Use the return and collection systems available
to dispose of the old device.

SCOPE OF DELIVERY

The scope of delivery includes:

PLACING THE DEVICE IN OPERATION
Caution!
Vehicle screws

Ensure vehicle screws are removed before
installation. (See "Installation” instructions).

DAMAGE CONTROL

Do not drop control panel. Protect the control
panel during transportation to avoid
encountering with impacts and dirt.

Do not expose the control panel to direct
sunlight or high temperature. Avoid direct
contact with the control panel’s electrical parts.

NOTE

The car sound system will automatically turn
off as soon as the control panel is removed.

DISCLAIMER

In no events shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property of life,
improper storage, whatsoever arising out of or
connected with the use or misuse of our products.

USA & CANADA : Products not intended for sales
in the United States and Canada. If purchased
in the U.S. or Canada, this product is purchases
as-is. No warranty, express or implied is provided
in the U.S. and Canada.

1

Summary of Contents for FRANKFURT 100












Reviews: