11
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Important information
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car radio
in a way that could distract you. Should the
traffic situation become particularly deman-
ding, we would advise you not to use the
radio. Please keep in mind that you travel a
distance of 14 m per second at a speed of
only 50 km/h. When adjusting the volume,
make sure that you are still able to hear
sounds coming from outside of the vehicle,
so that you are always able to react to war-
ning signals.
Installation / Hook-up
If you would like to install your new car radio
yourself or add other audio components to
the existing ones, then please read the enclo-
sed instructions on installation and hook-up
carefully.
Do not ground the loudspeaker outputs!
Use only Blaupunkt-certified accessories and
spare parts.
Radio operation
With this car radio you can receive FM fre-
quencies ranging from 87.5 to 108 MHz.
Station search
m should not be lit up in the display. If it is,
switch it off by pressing lo • m
•
press right or left.
The car radio will automatically tune
into the next station.
If you hold the button pressed, the search
function will forward quickly.
Manual station search
m (manual) must be lit up in the display. If it
is not, switch it on by pressing lo • m.
•
press right or left quickly.
The frequency will move up or down in
short intervals.
If you hold the button pressed, then the
frequencies will move up or down more
quickly.
Adjusting station search sensiti-
vity for FM
You can adjust the sensitivity of the automa-
tic station search.
•
Press lo • m.
When “Io” is visible in the display, then
only those stations with relatively strong
signals will be picked up (low sensitivi-
ty).
When “Io” is not visible in the display,
then stations with weaker signals will
also be picked up (high sensitivity).
Stereo - mono switch
If you would like to switch between stereo
and mono reception:
•
Press lo • m for approximately 2 se-
conds.
During mono reception the stereo sym-
bol
will disappear from the display.
Each time the car radio is switched on, the
reception will automatically be set to stereo.
The radio will automatically switch to mono
when the reception conditions are poor.