5
6
INSTALLATION
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt
authorized dealer if problem persist.
Solutions
Examine power wire and ground connections. Replace
and repair accordingly.
Examine speaker wires. Replace or repair accordingly.
Examine voltage output/connection and repair
accordingly.
Check the connection of input & output, ensure that
the connection is correct.
Adjust the equalization levels.
Lower the volume of the source unit.
Lower sub level.
Possible Causes
Disconnected power wires.
Disconnected speaker wires.
Remote wire failed to work.
The input and output connections
are reversed.
Equalizer is overdriven.
Problems
No audio output
Equalizer effect
cannot be obtained
Distorting Speakers
1.
2.
3.
Select an ideal installation location to mount the product unit under the dashboard.
Drill 4 holes with 4.2mm diameter. Fix the mounting brackets under the dash or in the rear of the car with 4pcs of
4x14mm tapping screws. Be careful when drilling to avoid damaging existing wiring under the dashboard.
Mount the unit to the mounting bracket with 4pcs of 3x10mm machine screw.
WIRING DIAGRAM
Ground
ACC
Do not connect negative charge of the battery
to the positive charge before installation.
Ground cable
to chassis
Ground cable
to chassis
WARNING
Option 2
2/4 CH Amplifier
AUX Player
Car Stereo
Connect to
speakers
Remote
Equalizer
Mono Block
Amplifier
Subwoofer
Connect to
subwoofer
