Blaupunkt Denver CD147 Owner'S Record Download Page 2

2

FCC Warning

The equipment has been tested and found to comply with the limits for a Class B device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used in accordance with instructions, may cause
harmful interference with radio communications. However, there is no guarantee that radio
interference will not occur in particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to contact the dealer or an experienced Radio/TV technician for
help.

You are cautioned that any changes or modifications not expressly approved in this manual could
void your authority to operate this equipment.

CAUTION
• The use of optical instruments with this product will increase eye hazard.
• Because the invisible laser beam in this compact disc player is harmful to the eyes, do not
attempt to disassemble this cabinet. Refer servicing to qualified personnel only.

SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety  performance standards of the US Department of Health and
Human Services.

Owner’s Record

The model and warranty numbers are located on the top of the unit. Record the warranty (serial)
number in the space provided below. Refer to these numbers whenever you call upon your
Blaupunkt dealer regarding this product.

Warranty Number _____________

Attach Sales Receipt Here

Summary of Contents for Denver CD147





















Reviews: