background image

Owner’s Record

The model and warranty numbers are located on the rear of the unit. Record the warranty in the space
provided below. Refer to these numbers whenever you call upon your Blaupunkt dealer regarding this
product.

Model No. 

Warranty Number

FCC Warning

The equipment has been tested and found to comply with the limits for a Class B device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy, and, if not installed and used in accordance with instructions, may cause harmful

interference with radio communications. However, there is no guarantee that radio interference will not
occur in particular installation.

The shielded interface cable recommended in this manual must be used with this equipment in order

to comply with limits for a digital device pursuant to Sub-part B of Part 15 of the FCC rules.

Because the laser beam used in this compact disc changer is harmful to the eyes, do not attempt to

disassemble the cabinet. Refer servicing to qualified personnel only.

You are cautioned that any changes or modifications not expressly approved in this manual could

void your warranty and authority to operate this equipment.

If you have any questions or problems concerning your unit that are not covered in this manual,
please contact your Blaupunkt dealer.

CAUTION

The use of optical instruments with this product will increase eye hazard.

Because the laser beam used in this compact disc changer is harmful to the eyes, do not attempt to

disassemble the cabinet. Refer servicing to qualified personnel only.

Safety Certification
This Compact Disc Player is made and tested to meet exacting safety standards, It meets FCC

requirements and complies with safety performance standards of the U.S. Department of Health and
Human Services.

Staple Your Sales Receipt Here

2

Summary of Contents for CDC RF6ir




















Reviews: