8
Radio mode | USB mode
Tuning into a station
There are various ways of tuning into a station:
Starting station seek tuning
쏅
Briefl y press the / button
4
to start the
station seek tuning.
The radio tunes into the next receivable sta-
tion.
Note:
For the reception area "EU" (Europe): In the
FM waveband, only traffi
c information sta-
tions are tuned into if the priority for traffi
c
information is switched on.
Tuning into stations manually
쏅
Press the / button
4
for approx. 2 sec-
onds to switch on the manual station seek
tuning.
To change the frequency in decrements/incre-
ments,
쏅
briefl y press the / button
4
once or sev-
eral times.
To change the frequency quickly,
쏅
press and hold down the / button
4
.
Note:
After approx. 5 seconds without any activity,
the manual station seek tuning is automati-
cally switched off . If you briefl y press the /
button
4
in this case, the car sound sys-
tem starts the station seek tuning.
Storing stations
Up to 5 stations can be stored on each waveband.
쏅
Select the desired waveband and adjust the
station.
쏅
Press the
button
5
for approx. 2 sec-
onds to change to the memory location level.
쏅
Use the button
4
to select the memory
location (memory locations 1 to 5) to which
the set station should be stored.
The memory location number appears on the
left side on the display.
쏅
Press the button
4
for approx. 2 seconds
to store the station.
The system exits the memory location level
and the station is stored at the selected mem-
ory location.
Note:
If the memory location is already occupied, it
is overwritten with a new store process.
Calling up a stored station
쏅
Select the desired waveband.
쏅
Press the
button
5
for approx. 2 sec-
onds to change to the memory location level.
쏅
Use the button
4
to select the memory
location (memory locations 1 to 5) where the
desired station is stored.
You hear the stored station with every change
of the memory location.
USB mode
Basic information
This car sound system can be used to play MP3
fi les on USB data carriers.
Note:
Blaupunkt cannot guarantee the proper func-
tioning of all USB data carriers available on
the market.
Note the following information when preparing
an MP3 data carrier:
• Naming of tracks and directories:
– Max. 24 characters without the fi le exten-
sion ".mp3" (the use of more characters
reduces the number of tracks and folders
that the car sound system can recognise)
– No umlauts or special characters
• USB format/fi le system: Mass storage device/
FAT16/32