When the camera is
fi
xed, put the lead-wire of the camera through the car trunk.
Notice
Camera
Emitter
Installation instructions for the camera:
Installation instructions for the emitter:
rear lamp
Notice
Speci
fi
cations
Packing List
Installation
Operations for Android system client
Operations for iOS Apple system client
Installation app Software
Settings:
WIFICAMERA
Not in range
.
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
image display time is relate to the CPU memory, software version, working
software number of mobile phone.
* when the background is black or the image is still, please exit the APP, and check
whether the wifi connection is normal then click again the APP icon to enter into
the software interface
.
*
,
Notice
Connection WiFi:
WIFICAMERA
Secured with WP2
WIFICAMERA
1. Turn on the iOS device and enter the App Store
2. Search “Sight Wi
fi
” app.
3. Install the Sight Wi
fi
app
Installation app Software
Connection WiFi:
WIFICAMERA
View the video:
G
Notice
The speci
fi
c steps to clear network memory are as follows. and then follow the above WIFI connection
method to reconnect the new network.
Press this
icon to enter into the settings menu
.
Y
ou
can change the default factory
SSID and password
of
the wifi camera tool, and clicking will show whether the change
is successful, and clicking
to cancel the new SSID set.
Settings:
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
image display time is relate to the CPU memory, software version, working
software number of mobile phone.
* when the background is black
click again
the APP icon
to enter into
the software interface
.
*
,
or the image is still, please exit the APP, and check
whether the wifi connection is
normal
.
then
Notice
WIFICAMERA
WP2 PSK
Password
Security
Connect
Cancel
4.
After adjustment, drill a second hole, then
mount and tighten to
fi
nish camera installation
3.
Move the camera orientation to adjust the
display e
ff
ect
2.
Use a Screwdriver to ensure that the
fi
rst
screw is properly screwed into the drill hole.
1.
In the proper position of rear license plate
drill a hole for mounting screws
View the video:
WIFI car rear view
Night Vision Range
>
3m
Power Supply
12V DC
Video output
0.9
.
Vp-p
75Ω
~1 2
Consumption Current
150mA MAX
Image Sensor
1/4inch CMOS
Minimum illumination
<
5
Lux
Electronic Exposure Time
1/60s-12ns(NTSC)
sec
1/50s-12.5ns(PAL)
sec
Horizontal View Angle
Storage Temperature
Operation Humidity
15%~85%RH
Operation Temperature
Dimensions
370 X 55 X 35MM
Weight
140g
Items
GL8912
640×480
pixels
Effective Pixels
Video Format
NTSC/PAL
80
O
O
-
10~
C
+50
O
-
20~
C
+60
WIFI transmitter box
Wireless Protocol
Modulation Mode
Transmission Distance
With No Obstacle
Weight
Operation Voltage
12V DC
Operation Frequency
2400
-
2483.5MHz
IEEE 802.11b, IEEE 802.11g,
IEEE 802.n (1T1R Modes)
Operation Current
150mA(MAX)
Encryption Mode
WPA2
802.11b
：
DSSS (CCK, DQPSK,
DBPSK)
•
802.11g/n
：
OFDM
(BPSK, QPSK, 16QAM, 64QAM)
≥
10m
60±5g
Operation Temperature
Dimensions
71
X
35.5
X
12.3MM
Storage Temperature
Operation Humidity
20%~90%RH
Items
GT4068
O
-
10~
C
+50
O
-
20~
C
+60
Settings
Connecting Camera
Logo
Settings
BPDW8913WR
2.4GHz Digtal Wireless
Car Rearview System
Open the APP, if the connection between the wi
fi
tool and the mobile device is
successful the app will be highlighted. Then the image would be transmitted from the
camera to the app. As shown in the
fi
gure below, the camera is showning real-time
monitoring in the app. The user would also be able to press icon to refresh the image
Open the APP, if the connection between the wi
fi
tool and the mobile device is
successful the app will be highlighted. Then the image would be transmitted from the
camera to the app. As shown in the
fi
gure below, the camera is showning real-time
monitoring in the app. The user would also be able to press icon to refresh the image
2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device
is “WIFICAMERA”. Then type in the password of the devices
(Default password: 88888888).
1. Click on the “ ” icon.
Wi-Fi
2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device
is “WIFICAMERA”. Then type in the password of the devices
(Default password: 88888888).
1. Click on the “ ” icon in the main interface of the iOS device.
* Never reverse the positive and negative pole. Reversing the poles
can damage the emitter box and camera, rendering them unusable.
* The positive and negative pole of the emitter box’s power cable are connected
to the positive and negative pole of the rear lamp of the car.
* The antenna of the emitter box should not be placed near any metal part of the car.
This can negatively e
ff
ect the emitting distance and image transmission.
1. Turn on the Andriod Phone and enter the Google Play Store
2. Search “Sight Wi
fi
” app.
3. Install the “Sight Wi
fi
” app
Wi-Fi
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network in the
"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.
Press this icon to enter into the settings menu you can change the default factory SSID
and password of the wifi camera tool, and clicking will show whether the change is successful,
and clicking to cancel the new SSID set.
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network in the
"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.
Connecting
Camera
Take a
Photo
Record
a Video
Video
Playback
* All the speci
fi
cations are subject to minor change without prior notice
License Plate
Nuts & Bolts
License Plate
Screws (Optional)
In-line Wire
Connectors
Grommet
Cable Ties
Black-
Red+
The speci
fi
c steps to clear network memory are as follows. and then follow the above WIFI connection
method to reconnect the new network.
