Blaupunkt Avignon RCM 127, Operating Instructions Manual, Page: 21 / 23

40
TIME -
The elapsed playback time
of the current title is dis-
played.
STEREO/MONO
You can select between
stereo or mono sound.
AM ON / OFF You can deactivate one or
both AM bands (MW/LW) in
order to reduce the number
of bands for selection with
TS/BND.
selectable:
AM ON – all bands
MW OFF – LW, FM
LW OFF – MW, FM
AM OFF – FM
LO/DX To adjust the seek tuning
sensitivity for local or distant
stations.
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
TA VOL To adjust the traffic an-
nouncement and beep tone
volume from between 0 to
63.
The message will then come
through at this volume, if the
volume set for the program
is lower.
If the program volume is
higher than the TA VOL lev-
el, the traffic report will be
played slightly louder.
LOUDNESS When the system is played
at a low volume level, the
Loudness function creates a
more natural sound by
boosting the low frequency
range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
CDC DISP For changer operation only
(optional).
You can select the desired
display mode for CD play-
back.
NUMBER -
The CD and track number is
displayed.
To quit the DSC programming mode
and store the adjustment:
•
Press DSC.
The DSC programming mode will be auto-
matically quit 8 seconds after you have
made the last adjustment.
Overview of DSC factory set-
tings
MIX OFF
REG OFF
RM OFF
VOL FIX 0
AUX OFF
BEEP 4
TA VOL 35
LOUDNESS 3
CDC DISP NUMBER
STEREO/MONO STEREO
AM ON
DX 1
Avignon RCM127 gb 15.05.2002, 12:16 Uhr 40