
17
BEEP
Switching the confi rmation beep on or off . Set-
tings: ON, OFF.
Note:
When storing radio stations, a confi rma-
tion beep sounds even if the OFF setting is
selected.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
to change be-
tween the settings.
Making settings in the "CLOCK"
menu
CLK DISP
Switch the permanent display of the time on or off .
Settings: ON, OFF.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
to change be-
tween the settings.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
to change be-
tween the settings.
SET CLOCK
Setting the time.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
counterclockwise
to set the hours.
쏅
Turn the volume control
4
clockwise to set
the minutes.
Note:
When you set the time in 12-hour mode
( MODE 12H), an "A" is displayed before the
time for the time before noon or a "P" for the
time after noon.
Making settings in the "VARIOUS"
menu
DEMO MODE
Switching the demo mode on or off . Settings:
ON, OFF.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
to change be-
tween the settings.
In demo mode, the features of the radio are shown
as scrolling text on the display.
BROWSE
Switching fast track selection in browse mode on
or off using the volume control
4
and the On/Off
button
3
. Settings: ON, OFF.
쏅
Press the On/Off button
3
to change the
setting.
쏅
Turn the volume control
4
to change be-
tween the settings.
User settings