Key
Function
LED
A
Switches the motor off.
The motor speed indication LEDs
go out.
Keypad Lock Function
Long press:
Activates/deactivates the keypad lock for hood cleaning.
All LEDs flash.
B
Turns the motor on at the first speed.
Fixed
Long press when all loads are off (Motor+Light):
performs a
saturated Filters alarm reset
.
All LEDs flash 3 times.
Signals the
saturated Metal Grease Filters alarm
and the need to wash
them. The alarm is activated after 100 hours of effective hood operation.
Flashing
C
Turns the motor on at the second speed.
Fixed
Long press when all loads are off (Motor+Light):
Activates/Deactivates the
Activated Carbon Filters alarm
.
All LEDs flash twice:
alarm activated.
All LEDs flash once:
alarm deactivated.
Signals the
saturated Activated Carbon Odour Filter alarm.
The alarm is
activated after 200 hours of effective hood operation.
Flashing
D
Turns the motor on at the third speed.
Fixed
Long press:
turns the motor on at the
Intensive
speed.
This speed is timed for 6 minutes. When the time is up, the system automat-
ically returns to the third speed.
Flashing
E
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the
Coupled Induction
Cooktop
is turned on.
The induction cooktop can control the speed of the hood motor. The way the
speed is controlled depends on how the user set up the cooktop. Refer to the
cooktop manual.
When the induction cooktop is switched on, the hood lights are switched on
at maximum intensity. When the induction cooktop is switched off, the status
of the lights is not modified.
Fixed:
AUTO mode activated.
Off:
AUTO mode temporarily deactiv-
ated.
MULTICONTROL coupling
Long press when all loads are off (Motor+Light):
the procedure for associating the hood to compatible devices (induction
cooktop or remote control) is initiated. Up to 3 induction cooktops can be
paired and only one remote control. See the manual of the devices for details
of the operations that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised within
this time check that you have previously activated the procedure for the
devices to be coupled. The maximum number of linkable devices may have
been reached.
LEDs E, F, G and H flashing:
coupling in progress.
Upon successful completion of the
procedure, the LEDs E, F, G and
H are switched on for 2 seconds.
F
24h Function
Activates/Deactivates the motor in the 24h mode, a speed that allows suction
of 10 minutes every hour, for a 24-hour cycle.
Cannot be activated if the Intensive or Delay modes are active.
Flashing
G
Delay Function
Activates/Deactivates the Delay function, the automatic delayed shut-down
of the motor and lighting system after 30 minutes.
Cannot be activated if the Intensive or Delay functions are active.
Fixed together with the set speed
LED.
11
