www.blaubergventilatoren.de
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z)
19
All the operations specific to the technical maintenance must be performed upon disconnecting the fan from power mains. The technical
maintenance includes periodic cleaning of the fan surfaces from dust and dirt. To dust off the metal parts of the fan, use a dry soft brush
or a stream of compressed air. Every 6 months clean the impeller with a warm detergent solution while avoiding water penetration onto
the electric motor. Wipe the cleaned surfaces dry.
To carry out technical maintenance of the
Axis-F, Tubo-M(Z), Tubo-MA(Z), Tubo-F
fans, remove the fans from the duct by undoing the
retaining bolts on the
Axis-F
units or disconnecting the mounting clamps on the
Tubo-M(Z), Tubo-MA(Z)
and
Tubo-F
units. To carry
out work on the
Axis-Q, Axis-QR, Axis-QA, Axis-QRA
units, undo the bolt 4 and disconnect the grille and electric motor assembly from
the casing
Axis-Q and Axis-QR technical maintenance
Axis-F technical maintenance
DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE
ANY MAINTENANCE OPERATIONS!
TECHNICAL MAINTENANCE