6
938407/2-0917
Installing the Kato Plus on a Wheelbase
Wheelbases complete with base and back canvas (fig. 1)
1. Remove the armrests from the wheelbase to improve access.
2. Place the Kato Plus onto the wheelbase canvas.
3. Pass the two retaining straps around the
wheelbase uprights. Make sure that the retaining straps are not
tangled or obstructed.
4. Push both ends of the buckle together.
5. Tighten both retaining straps by pulling the loose end
of the webbing away from the buckle.
6. If the Kato Plus has a tube on the rear of the
back support (
fig. 2
) make sure that the U-shaped
brackets (
A
) fasten around the push handles of
the wheelbase (
B
).
Reverse this process to remove the Kato Plus from a wheelbase.
fig.
1
fig.
2
Note:
The
seating
system
might have
only one
strap.
A
B
