17
5.4
Switch on the BG-250P
Turn on the dust collector before switching on the
machine.
Connect the dust hose with the machine
Open the fuel valve (1)
Stand behind the machine
Make sure that the machine stands on the machine
support.
Put the cord of the deadman switch (2) on to your arm or
put it on to your clothing.
Check if the key of the deadman switch (2) is in and the
stop button (6) is turned up.
Take the steering handle (3) with one hand pull the gas
throttle (4) up to the half and turn the contact switch (5)
to start the engine.
When the battery is empty, the machine could always be
started with the cord (7)
Lift the machine support with the lever handle (8) and let
down the machine till the diamond disc hits the floor
Start grinding and pull the gas throttle (4) for more
grinding speed.
5.5
Switch off the BG-250P
Push the gas throttle (4) to the front.
Push the red button (6)
Wait until the machine stops rotating before you set the machine on the support with the lever handle
(8)
Pull out the power supply and the key of the deadman switch (2)
Close the fuel valve (1)
Shut down the dust collector.
