Blastrac BDC 3140 P, Instruction Manual

Page: 19 / 61

C324
6
07/2008
BDC-3140P
I
GB
F
D
E
Technical specifications
Parameter Units BDC-3140P
Voltage / frequency V/Hz 230/60 400/50 440/60
Power rating kW 4.6 4 6.3
Nominal noise dB(A) 72 71 80
Peak noise* dB(A) 75 82 81
Protection IP 55 55 55
Insulation Class F F F
Capacity L 100 100 100
Inlet (diameter) mm 70 70 70
Max vacuum mmH
2
O 2300 3000 2000
Maximum air flow
rate(without hose and
reductions)
L/min’ 8000 8600 10000
Main filter surface m
2
15 15 15
* = when the compressor is operating
Dimensions
Figure 3
Model
BDC-3140
230V/60Hz
BDC-3140
400V/50Hz
BDC-3140
440V/60Hz
A (mm) 1525 1450 1525
B (mm) 1240 1240 1240
C (mm) 670 670 670
kg
(1)
195 188 215
(1) Net weight
[ NOTE ]
■ Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
Controls, indicators and connections
Figure 4
1 Container release lever
2 Castor lever
3 Main switch
4 Start button
5 Stop button
6 Voltage presence white indicator
7 Thermal protection operation red indicator
8 Compressor start/stop button
(BDC-3140P model 440V/60Hz - 230V/60Hz)
9 Compressor pressure governor
(BDC-3140P model 440V/60Hz - 230V/60Hz)
10 Compressor start/stop button
(BDC-3140P model 400V/50Hz)
11 Compressor pressure governor
(BDC-3140P model 400V/50Hz)
Inspection prior to starting
Figure 5
1 Inlet
Prior to starting, check that:
■ The filters are installed;
■ All latches are tightly locked;
■ The vacuum hose and tools have been correctly fitted
into the inlet ( 1 );
■ The bag or safety container is installed, if applicable.
Do not use the vacuum cleaner if the filter is faulty.