Blade® 200 SR X Gain Adjustment
The 200 SR X default settings are appropriate for most users. We recommend flying with the default gain
parameters first, especially for newer pilots. More advanced pilots may want to adjust the gain parameters. Pilots
flying at higher altitudes (above 4000 feet or 1200 meters msl) will likely want to increase the motor power to
improve performance.
Entering Gain Adjustment Mode
1. Lower the throttle stick to the lowest position. If your transmitter utilizes mechanical trims (like the
included RTF transmitter), set the throttle trim to the highest position. Set all other trims to the center
position.
Gas-Stick auf Gas aus (zur Vorsicht die Blätter abschrauben)
2. Power ON the transmitter.
Sender einschalten
3. Install the flight battery on the helicopter frame. Secure the flight battery with the hook and loop strap.
Akku aufschnallen
4. Connect the battery connector to the ESC.
Akku einstecken
5. Place the helicopter on a flat surface and leave it still until the motor beeps twice and the blue ESC LED
glows solid, indicating initialization is complete.
Den Heli auf eine ebene Fläche stellen und warten bis die Initialisierung fertig ist
6. Move and hold the left stick to the bottom right corner and the right stick to the bottom right corner. See
illustration.
Den linken und rechten Stick in die rechte untere Ecke ziehen (außer bei mir da ich Mode 1 fliege und Gas
ziehe)
Panic Button noch dazu halten und warten bis die Servos sich bewegt haben
– dann alles loslassen.
Sie befinden sich nun im Gain Einstell Modus
7. Press and hold the bind/panic switch until the swash servos move.
8. Release the sticks and bind/panic switch.
9. The model is now in Gain Adjustment Mode.
Bei der Spektrum DX6i muss man den FLAP/Gyro ziehen um in die GAIN Einstellungen zu
gelangen
Gain Adjustment
The gain adjustment parameters are scaled to appropriate and safe adjustments per function, so you cannot
accidentally make your model unflyable. Plus, any changes made are easily reversible by resetting to the default
settings. For example, 0% cyclic gain does not turn the gyros off; it simply decreases the gain. 100% is the default
gain for each parameter.
The selected gain parameter is indicated by the lean of the swashplate on the roll axis:
Gain Parameter 1 = 100% Left
Gain Parameter 2 = 50% Left
Gain Parameter 3 = 50% Right
Gain Parameter 4 = 100% Right
Use the aileron stick to select the gain parameter you would like to adjust. Move the stick to the right to select the
next gain parameter. Move the stick to the left to select the previous gain parameter.
Benutzen Sie den Roll-Stick nach Rechts, um zum nächsten Gain-Parameter zu gelangen
Mit Roll-Stick nach links zum vorherigen Gain-Parameter.
