BLACKMER MVP100B Installation, Operation And Maintenance Instructions Download Page 1

 

BLACKMER SEAL-LESS PUMPS 

960902

 

INSTRUCTIONS NO. 108-B00

_apr05

 

INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS 

                  

MODELS:  

SMVP50B, SMVP100B, SMVP200B 

 

 

Section 

Effective 

Replaces 

108 
April 2005 
July 2002 
 

 
 

 

TABLE OF CONTENTS 

Page

PUMP DATA

 

 Technical 

Data....................................................... 2

 

Initial Pump Start Up Information........................... 2

INSTALLATION

 

 Pre-Installation 

Cleaning........................................ 3

 

Location and Piping ............................................... 3

 Check 

Valves......................................................... 3

 Pump 

Mounting...................................................... 3

 Motor 

Installation ................................................... 4

OPERATION

 

 

Pre-Start Up Check List ......................................... 5

 

Start Up Procedures .............................................. 5

 Pump 

Rotation ....................................................... 5

 Reverse 

Rotation ................................................... 5

 

Flushing the Pump................................................. 5

 

Pump Relief Valve ................................................. 6

 

Relief Valve Setting and Adjustment ..................... 6

MAINTENANCE

 

 Strainers ................................................................ 7
 Lubrication ............................................................. 7
 Vane 

Replacement ................................................ 8

 Pump 

Disassembly ................................................ 8

 Pump 

Assembly..................................................... 9

TROUBLE SHOOTING

......................................

11

NOTE

: Numbers in parentheses following individual parts 

indicate reference numbers on Blackmer Parts Lists 108-
B01, 108-B02 and 108-B03. 

 

NOTE

: Blackmer pump manuals & parts lists may be 

obtained from Blackmer’s website (www. blackmer. com) 
or by contacting Blackmer Customer Service 

 

 

SAFETY DATA 

 

 

This is a SAFETY ALERT SYMBOL. 

When you see this symbol on the product, or in the 

manual, look for one of the following signal words and be 

alert to the potential for personal injury, death or major 

property damage 

 

Warns of hazards that WILL cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause personal injury 

or property damage. 

NOTICE: 

Indicates special instructions which are very 

important and must be followed. 

 

NOTICE:

 

Blackmer Seal-Less pumps 

MUST

 only be installed In 

systems, which have been designed by qualified 
engineering personnel. The system 

MUST

 conform to 

all applicable local and national regulations and safety 
standards. 

 

This manual is intended to assist in the installation 
and operation of the Blackmer Seal-Less pumps, and 

MUST

 be kept with the pump. 

 

Blackmer Seal-Less pump service shall be performed 
by qualified technicians 

ONLY

. Service shall conform 

to all applicable local and national regulations and 
safety standards. 

 

Thoroughly review this manual, all instructions and 
hazard warnings, 

BEFORE

 performing any work on 

the Blackmer Seal-Less pumps. 

 

Maintain 

ALL

 system and Blackmer Seal-Less pump 

operation and hazard warning decals. 

 
 
 
 
 
 

2007: 

Discontinued Models: MVP50B, MVP100B, SMVP300B

Summary of Contents for MVP100B













Reviews: