background image

BLACKMER LIQUEFIED GAS PUMPS 

960419

 

INSTRUCTIONS NO. 501-J00 

FOR LP-GAS or NH

3

 SERVICE TRUCK AND BASE MOUNTED 

INSTALLATION OPERATION AND MAINTENANCE INSTRUCTIONS

 

Section 

Effective 

Replaces 

501 
Jun 2016 
Jan 2014 

MODEL: LGLH2A

 

 

 

Patent Protected by U.S. Patent 6030191 and Related Foreign Patents.

 

 

 

 

 

 

TABLE OF CONTENTS 

Page 

SAFETY DATA

 ..................................................................... 1

 

PUMP DATA

 ......................................................................... 2 

 Pump 

Identification ..................................................... 2 

 Technical 

Data ........................................................... 2 

 

Initial Pump Start Up Information ............................... 2 

GENERAL INSTALLATION AND OPERATION

  

 Welded 

Connections .................................................. 3 

 Pre-Installation Cleaning ............................................ 3 
 Location 

and 

Piping .................................................... 3 

 

Pump Relief Valve and Bypass Valve ........................ 4 

 Check 

Valves ............................................................. 4 

 Pump 

Rotation ........................................................... 4 

MOTOR DRIVEN PUMPS 

 

 Pump 

Mounting .......................................................... 4 

 Coupling 

Alignment .................................................... 5 

 V-Belt 

Drive ................................................................ 5 

 V-Belt 

Disassembly .................................................... 5 

 Pre-Start 

Up 

Check List ............................................. 6 

 

Start Up Procedures ................................................... 6 

TRUCK MOUNTED PUMPS

 

 Truck 

Mounting .......................................................... 6 

 Pump 

Drive ................................................................ 6 

 Hydraulic 

Drive ........................................................... 7 

 Pre-Start 

Up 

Check List ............................................. 7 

 

Start Up Procedures ................................................... 7 

 Pump 

Speed .............................................................. 8 

MAINTENANCE 

 Strainers ..................................................................... 9 
 Lubrication 

.................................................................. 9 

 Vane 

Replacement ..................................................... 9 

 Pump 

Disassembly .................................................... 9 

 Pump 

Assembly ....................................................... 10 

TROUBLE SHOOTING

 ...................................................... 11 

 
NOTE

: Numbers in parentheses following individual parts 

indicate reference numbers on Blackmer Parts List 501-J01. 
 
Blackmer pump manuals and parts lists may be obtained from 
Blackmer's website (www.blackmer.com) or by contacting 
Blackmer Customer Service. 
 

SAFETY DATA 

 

This is a SAFETY ALERT SYMBOL. 

When you see this symbol on the product, or in the manual, 
look for one of the following signal words and be alert to the 

potential for personal injury, death or major property 

damage 

 

Warns of hazards that WILL cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause serious personal injury, 

death or major property damage. 

 

Warns of hazards that CAN cause personal injury 

or property damage. 

NOTICE: 

Indicates special instructions which are very 

important and must be followed. 

 

 

NOTICE: 

Blackmer liquefied gas pumps MUST only be installed 
in systems which have been designed by qualified 
engineering personnel. The system MUST conform to 
all applicable local and national regulations and safety 
standards. 

This manual is intended to assist in the installation 
and operation of the Blackmer liquefied gas pumps, 
and MUST be kept with the pump. 

Blackmer liquefied gas pump service shall be 
performed by qualified technicians ONLY. Service 
shall conform to all applicable local and national 
regulations and safety standards. 

Thoroughly review this manual, all Instructions and 
hazard warnings, BEFORE performing any work on 
the Blackmer liquefied gas pumps. 

Maintain ALL system and Blackmer liquefied gas 
pump operation and hazard warning decals. 

 

 

Summary of Contents for LGLH2A













Reviews: