Monitor Settings
The ‘monitor’ tab lets you adjust status text, overlays, and other monitoring options for your
URSA Broadcast's LCD touchscreen, front and main SDI outputs. Options are arranged by
output between ‘LCD’, ‘front SDI’ and ‘main SDI’, as well as ‘all,’ which covers monitor settings
that affect all outputs on your URSA Broadcast. Each of these menus has two pages of options,
which you can cycle through by tapping the arrows at the edge of your camera’s touchscreen,
or swiping left or right.
LCD, Front SDI, Main SDI Monitor Settings 1
The first page of the 'LCD,' 'front SDI,' and 'main SDI,' monitor tab contains identical settings for
each output. For example, you can set 'zebra' on for the LCD touchscreen, but off the front or
main SDI outputs.
Clean Feed
Tap the ‘clean feed’ switch in the ‘LCD,’ ‘front SDI’ and ‘main SDI’ menus to disable
all status text and overlays for that output, except the record tally indicator.
Your URSA Broadcast LCD touchscreen will
still display a record tally in clean feed mode
NOTE
LUTs will still be applied to outputs with ‘clean feed’ enabled. To disable
LUTS, disable the ‘display LUT’ switch in the ‘Monitor’ menu for that output.
76
Settings