Fairlight 2 Bay Console
The 2 bay configuration sets the Fairlight Console Channel Control module and Fairlight
Console Channel Fader module next to the Fairlight Console Audio Editor
NOTE
You can arrange the Fairlight modules on either side of the audio editor and
change the position of the mouse area. For example you may be left handed and want to
have the mouse on the left side of the audio editor module. Fairlight modules are mounted
in a module bracket that can be lifted out and repositioned. Keep reading this manual
for more information on how to install the Fairlight modules into the module brackets.
A Fairlight Console Channel Rack Kit is also available from Blackmagic Design resellers
if you need to install additional devices in your console. For example Blackmagic
HyperDeck recorders or SmartScope Duo monitors.
Additionally, you can install Fairlight Console LCD Monitor Blank, Fairlight Console
Channel Control Blank, or Fairlight Console Channel Fader Blank kits.
Unpacking and Assembling
Your Fairlight console is shipped in a large, strong and secure road case containing the
Fairlight Console chassis and legs. Each Fairlight module is shipped separately. Refer to the
‘technical specifications’ section of this manual for a complete list of size and weight
measurements for each Fairlight configuration.
5
Unpacking and Assembling
