manualshive.com logo in svg

Blackmagicdesign ATEM Camera Converter, Installation And Operation Manual

Share
Download
Blackmagicdesign ATEM Camera Converter Installation And Operation Manual Download Page 109

Using Audio

109

Using a Third Party Audio Mixer Control Surface

Using an Audio Mixer Control Surface

In the fast-paced world of live TV production, sometimes a bit of help from equipment takes the pressure 
off. If you need to mix more than one audio source at a time on your ATEM switcher then here's an idea that 
can help. Connecting a hardware audio mixer control surface to the ATEM switcher provides you with the 
ability to adjust multiple audio levels at the same time. By contrast, a mouse can only adjust one fader at a 
time in the audio mixer software interface.

An audio mixer control surface can be connected to your Mac or PC as a MIDI device using Mackie Control 
commands to communicate with the ATEM switcher.

Many third party MIDI control surfaces are compatible with your ATEM switcher but please check with the 
manufacturer of your control surface if in doubt.

You can adjust multiple audio levels at the same time by connecting a hardware audio mixer to the computer which  
is running ATEM Software Control.

Audio Mixing Console

USB Computer

USB

Ethernet

ATEM Television Studio

Summary of Contents for ATEM Camera Converter









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands