3.1.1
Body
The body of the device is manufactured out of ABS, with rugged build quality to ensure that the contents
are safe from physical, chemical and thermal stresses during transport. Expanded Polyurethane foam is
used as insulating material which helps maximise the cooling retention period of the cold chamber.
The body is the base of the entire product, with the cold chamber, instrumentation, control system and
battery pack assembled inside it. The body also has an ambient temperature sensor embedded in the side.
3.1.2
Chamber
The temperature-controlled cold chamber of 1.5L capacity is manufactured out of double-line Stainless
Steel (SS304), which is food-grade to ensure that the chamber will not undergo corrosion or react with
any of the typically transported bio-chemical solutions. The chamber also has 3 effective layers of
protection to ensure that the contents of the chamber are not contaminated by agents and absorbs mild
shocks to prevent breakage/spillage of contents.
The chamber is sealed by the Head Cap assembly, which contains the TEA Assembly to maintain constant
temperatures. A locking ring ensures proper sealing of the chamber.
Body
Charging port
Ambient Temperature
sensor
User Interface
