background image

Operating Instructions 

FOR TBM15CR-LI

HYDRAULIC COMPRESSION TOOL

TA04721  B   Page 1 of 8

 

Page

1.0 GENERAL INFORMATION......................................................... 2

1.1 Safety Rules........................................................................... 2
1.2 Features................................................................................. 2
1.3 Specifications......................................................................... 2

2.0 Parts & Accessories .................................................................. 3

2.1 Hydraulic Compression Tool................................................... 3
2.2 Battery. .................................................................................. 3
2.3 Charger.................................................................................. 3
2.4 Battery Adapter. ..................................................................... 3
2.5 Carrying Case ........................................................................ 3

3.0 Operating Instructions .............................................................. 4

3.1 Charging the Battery. ............................................................. 4
3.2 Attaching & Detaching the Battery.......................................... 4

 Page

3.3 Compression Cycles .............................................................. 4
3.4 Switch Operations.................................................................. 4
3.5 Compression Operation ......................................................... 5
3.6 Maintenance & Operation....................................................... 5
3.7 Trouble Shooting.................................................................... 5

4.0 Important Operation Precautions ............................................ 6

4.1 Precautions for the Compression Tool .................................... 6
4.2 Precautions for the Battery. .................................................... 6
4.3 Precautions for the Charger.................................................... 6

5.0 Parts Breakdown....................................................................... 7

5.1 Parts Diagram ........................................................................ 7
5.2 Parts List................................................................................ 8

Table of Contents

Summary of Contents for TBM15CR-LI









Reviews: