background image

1

Standard Features:

Two 5-Button Remote Transmitters
Status indicator (LED)
Valet / override switch
Multi-tone siren
Dual stage impact sensor
Remote panic
Remote chirp mute 
Remote sensor bypass
Passive or active arming

Optional Features:

Flashing parking lights
Starter disable 
Keyless entry
Remote trunk or hatch release
Illuminated entry
Hood and trunk protection
Remote auto start
Power window roll up
Glass break sensor
Microwave sensor

Note:

Some features may require additional

parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.

System Operation

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will turn solid for 10 seconds

then start flashing slowly.

After 10

seconds the system is armed.

After Arming, if the system detects a bad
sensor or an open zone, the siren will chirp
and the parking lights will flash 4 times to
indicate a zone is open. The system will
ignore that input, but keep all other areas
protected.
While Armed, the system will trigger if:

• The doors are opened.
• The shock sensor detects an impact.
• An optional sensor is disturbed.
• The hood or trunk is opened.

When triggered by the door or hood/trunk
input the siren will sound, the horn will
honk, and the parking lights will flash for 45
seconds. If triggered by a sensor, the alarm
cycle will last 30 seconds.
If the same input triggers the system 3 times
during a single arming cycle, the system will
bypass that input, keeping the other zones
protected, until the next time the system is
armed.
If the shock sensor detects a light impact to
the vehicle or an optional sensor is
disturbed, the system will chirp and the
parking lights will flash 5 times to warn away
the potential intruder.
*

Optional Feature

6R / 5-BUTTON SERIES

VEHICLE SECURITY SYSTEM

Button

1

Button

3

Button

2

Button

4

Button

5

BW3900a.qxd  2/25/05 10:46 AM  Page 1

Summary of Contents for BW 3900













Reviews: