Black Stone 1924, Owner'S Manual

Page: 12 / 108

ENG
LIS
H
ENG
LIS
H
TrOUBLESHOOTInG
Section 01
BATTERY POWERED IGNITION
TROUBLESHOOTING
If you CAN ignite your griddle with a match
POSSIBLE CAUSES SOLUTION
01. Dead battery or no battery. Replace with new battery.
02. Battery installed incorrectly. Ensure that the battery is installed nega-
tive end first.
03. Igniter wire misaligned. Ensure that the igniter wire is posi-
tioned 1/8” to 1/4” away from the burner
tube, positioned above a burner hole.
04. Damage to the ignition system. Contact customer service for replace-
ment parts.
If you CAN NOT ignite your griddle with a match
POSSIBLE CAUSES SOLUTION
05. Burner tubes are not receiving fuel. Please reference the Gas Flow section of
the Troubleshooting Chapter.
SYMPTOMS
01. Burner will not Light with ignition system
02. Pressing the ignition button does not result in a clicking sound
If ignition does not occur in 5 seconds, turn the burner controls off, wait 5
minutes and repeat the lighting procedure.
If this does not work, to determine the cause, please try to ignite your griddle
with a match. (Please reference the Match Lighting Instructions in the
Cleaning the Burner Assembly section of the Care & Maintenance chapter.)
Insert one AA battery (not included)
into the battery socket with the posi-
tive terminal facing out, then screw
on the Ignition Button until tight. Be
careful to not over tighten.
Troubleshooting
STEP 04
Install the control knobs by pushing them into place in the OFF
position. Insert one (1) AA battery (not included) under the ignition button.
STEP 05
Use eight (8) M6x12 screws to attach the side shelves to the
griddle body.
Model 1924
| Owner’s Manual |
08
Assembly Guide